aquajet
Dec 6, 01:28 PM
If you do decide to swap out the logicboard from a newer/faster iMac, keep in mind there are two 500mhz boards out there...the DV SE which has the older 8mb Rage chip and the later models which have the 16mb chip. I'd look for a 600 or 700mhz board to be safe.
Isoparm
Mar 3, 07:50 PM
I'm trying to forward requests from one port to another and running into problems.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
Mr. Chewbacca
Apr 10, 09:46 AM
folder enhancer is pretty nice
supraja
Dec 30, 04:14 AM
Thank you for post useful information.
more...
sushi
Dec 16, 05:51 PM
How do I re-setup it? The problem seems to be that it can't find any networks anymore. The reception is zero.
After you remove the preferences per MJ's suggestion, and check all your connections and it still doesn't work, then reset your Airport to it's original settings.
After you reset your Airport, then use the utility Airport Setup Assistant in your UTILITIES folder under your APPLICATIONS folder.
They should be able to find each other then.
Sushi
After you remove the preferences per MJ's suggestion, and check all your connections and it still doesn't work, then reset your Airport to it's original settings.
After you reset your Airport, then use the utility Airport Setup Assistant in your UTILITIES folder under your APPLICATIONS folder.
They should be able to find each other then.
Sushi
Macsavvytech
May 4, 04:25 AM
Ok here is my rig: it includes the MBP, my firewire/usb harddrive, some chewing gum for intense coding, mosquito repellent (living in Australian tropics), screen cleaning cloths, mouse etc and my awesome trash can!
more...
awmazz
May 16, 08:30 PM
9to5Mac picked up the story. That's awesome! http://9to5mac.com/node/16891
Ha, one of the comments is saying it was made for the Batman TV show. Which was back in the '60s!
Ha, one of the comments is saying it was made for the Batman TV show. Which was back in the '60s!
CHSeifert
Apr 12, 12:57 PM
Thx for your replies - but that's a bummer :(
Had hoped it would work.
Then I will wait until MacPro gets SATA 3 support with my purchase. Buying an expensive MacPro tower with no support for SATA 3 and no boot support for PCI express SSD cards seems crazy to me to be quite honest !
Scr_ew Thunderbolt, but I really do need SATA 3 support as I'm a HDD/SSD geek :)
Coming from the self building PC tower world Apple sure is very very limited in what ways you can upgrade these machines.
If not for all the hackingtosh trouble I would've gone that way.
Must say I now re-re-re consider going back to Win 7 Lian Li Alu tower with PCI express X2 Revodrive as bo�te drive, 2 Vertex 3 240 gb for programs and often used doc, sheet, pic and database files, 2 3 tb WD Caviar Black HDD for music & movies, i7 2600 k Sandybridge CPU, Asus Maximus mobo, 1000 watt gold plated Corsair psu, 32 GB 1600 MHz DDR 3 ram, Radeon 6970 2 gb DDR 3 GPU, 2 ACD 27" displays and one matte Dell 2711 27" display in the middle - and then still have money left over :)
I will still miss OSx darn much though, but pheeewww I feel like I'm slamming my head against a wall with all the current mac products :(
iMac outdated - yeahhhh Sandy will come in 2-3-4-4-6-7-8-9-10 weeks time or 3 months or....
MacPro outdated but NO new xeon cpu untill late 2011 early 2012 :(
MBP updated - but too big compared to MBA for travel and not expandable enough as desktop replacement for my needs :(
MBA - PERFECT as travel mate had it had backlit keys, now it's only 99% perfection !
----
Vh/Regards
Claus - TapaTalk on my Ip4
Had hoped it would work.
Then I will wait until MacPro gets SATA 3 support with my purchase. Buying an expensive MacPro tower with no support for SATA 3 and no boot support for PCI express SSD cards seems crazy to me to be quite honest !
Scr_ew Thunderbolt, but I really do need SATA 3 support as I'm a HDD/SSD geek :)
Coming from the self building PC tower world Apple sure is very very limited in what ways you can upgrade these machines.
If not for all the hackingtosh trouble I would've gone that way.
Must say I now re-re-re consider going back to Win 7 Lian Li Alu tower with PCI express X2 Revodrive as bo�te drive, 2 Vertex 3 240 gb for programs and often used doc, sheet, pic and database files, 2 3 tb WD Caviar Black HDD for music & movies, i7 2600 k Sandybridge CPU, Asus Maximus mobo, 1000 watt gold plated Corsair psu, 32 GB 1600 MHz DDR 3 ram, Radeon 6970 2 gb DDR 3 GPU, 2 ACD 27" displays and one matte Dell 2711 27" display in the middle - and then still have money left over :)
I will still miss OSx darn much though, but pheeewww I feel like I'm slamming my head against a wall with all the current mac products :(
iMac outdated - yeahhhh Sandy will come in 2-3-4-4-6-7-8-9-10 weeks time or 3 months or....
MacPro outdated but NO new xeon cpu untill late 2011 early 2012 :(
MBP updated - but too big compared to MBA for travel and not expandable enough as desktop replacement for my needs :(
MBA - PERFECT as travel mate had it had backlit keys, now it's only 99% perfection !
----
Vh/Regards
Claus - TapaTalk on my Ip4
more...
TheMacBookPro
Apr 24, 09:35 PM
Since the 11" and 13" are almost identical, I suppose that the technician guide mentioned here applies to both.
There is a specific service manual for each Mac, including the 11-inch Air.
I've uploaded it to Mediafire: http://www.mediafire.com/?745cwqotg5zjiq5 (mba_11_late2010.pdf)
Hopefully this helps someone.
Cheers
There is a specific service manual for each Mac, including the 11-inch Air.
I've uploaded it to Mediafire: http://www.mediafire.com/?745cwqotg5zjiq5 (mba_11_late2010.pdf)
Hopefully this helps someone.
Cheers
gorskiegangsta
May 2, 11:58 PM
Are you sure the 2008 model has DDR3? If so, then it means the 2008 model is compatible with DDR3 so there should be no issues, it'll just downclock to 1067mhz.
more...
Blipp
Apr 28, 09:40 AM
4 pin = 400 FW no power - used on DV video cameras
6 pin = 400 FW with power - HD's, scanners, etc
9 pin = 800 FW with power
The great thing about firewire... no processor power is used, unlike USB that uses the processor.I've always heard the 6pin variant referred to as FW600 while FW400 was reserved only for the mini 4pin which doesn't have power. I realize it may not be technically correct but it's always allowed easier differentiation between the two connectors.
6 pin = 400 FW with power - HD's, scanners, etc
9 pin = 800 FW with power
The great thing about firewire... no processor power is used, unlike USB that uses the processor.I've always heard the 6pin variant referred to as FW600 while FW400 was reserved only for the mini 4pin which doesn't have power. I realize it may not be technically correct but it's always allowed easier differentiation between the two connectors.
elsami
Apr 19, 08:15 AM
Thanks guys, ill try a couple of the tips out, and report back. I might stay away from the more risky ones though lol...
more...
mad jew
Dec 19, 08:12 AM
I think it's ingenious, but it needs blood.
jbromer
Apr 9, 09:41 PM
http://cgi.ebay.com/NEW-bLack-ReD-Camero-BuMper-cAsE-Cover-OEM-iPhone-4-/220749505305?pt=PDA_Accessories&hash=item3365b22319
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
Looks just like the SGP Neo Hybrid EX (a knockoff?). If so, only the Apple plug will fit...
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
Looks just like the SGP Neo Hybrid EX (a knockoff?). If so, only the Apple plug will fit...
more...
Kebabselector
Apr 28, 02:07 PM
The iMac is a better buy if you are intending to replace your keyboard and considering upgrading your monitor.
Unless of course you don't want to forced to have a glossy/glass screen.
Unless of course you don't want to forced to have a glossy/glass screen.
iJohnHenry
Dec 14, 04:16 PM
There are a lot of lessons to be learned here. It's a new world out there.
Yes, believe nothing that you read, and only half of what you see. :D
Yes, believe nothing that you read, and only half of what you see. :D
more...
GGJstudios
May 6, 06:52 PM
I never had this problem before. I'm in a few forums. A lot of times I took a picture from google images, copied them, then pasted it to the forum using Image.
Now when I click copy. My Mac makes that "clunking" sound and won't paste. What's up with that?
The IMG tags are only for images that already appear on the web. What you place between the image tags is the URL to the image location. (Be sure to use TIMG instead of IMG for large images). For images that exist on your computer, simply click the paperclip icon when composing a post and attach the image.
284381
Now when I click copy. My Mac makes that "clunking" sound and won't paste. What's up with that?
The IMG tags are only for images that already appear on the web. What you place between the image tags is the URL to the image location. (Be sure to use TIMG instead of IMG for large images). For images that exist on your computer, simply click the paperclip icon when composing a post and attach the image.
284381
wilywampa
May 2, 08:19 PM
I ordered a 15" MBP (:D) with 4GB of RAM. I also ordered 8GB of RAM to put in it from Newegg. I'm wondering if I can replace the 2GB of RAM in my old Late 2008 15" MBP with the memory from the new computer to increase the old laptop's resale value. It seems to be the same form factor, but the new memory is PC3-10600 DDR3 1333 and the old memory is PC3-8500 DDR3 1066 MHz. Does that affect compatibility? Thanks!
hotsnuglemonstr
Jun 24, 07:15 AM
Now in line.. People bumrushed a makeshift line and the police let us stay.. If u ain't here now... 0 chance. Insane
spectre51
May 6, 09:52 PM
Has there been any word on if you will be able to upgrade directly to the full released version from the preview builds?
Whats the best way to backup the entire SL install so that if I wanted to go back I could just reinstall it without having to reinstall all the apps?
Whats the best way to backup the entire SL install so that if I wanted to go back I could just reinstall it without having to reinstall all the apps?
chixnic
Jul 8, 11:39 PM
Where are my Broward People?
I will be at the store at about 10am, I can't wake up early, I took the day off and I am sleeping in, even if it's the iPhone launch :)
Who's going??
I will be at the store at about 10am, I can't wake up early, I took the day off and I am sleeping in, even if it's the iPhone launch :)
Who's going??
mdgm
Feb 14, 08:49 PM
none of them are quite good enough so I am waiting for a 2011 upgrade. THE imac and the mac pro I own are both much much much better for eye tv. they handle sports with no blurring. no mini I have owned was or is as good.
What about if you put a SSD in the Mini? Would that make a difference for EyeTV (I guess probably not if you were using the RAM buffer)?
What about if you put a SSD in the Mini? Would that make a difference for EyeTV (I guess probably not if you were using the RAM buffer)?
job
Oct 20, 04:45 PM
Originally posted by Rower_CPU
D'oh...silly me for taking it in context. :p
He's been doing some field work, last I heard. He still checks in occasionally.
speak of the devil...
he's online right now.
D'oh...silly me for taking it in context. :p
He's been doing some field work, last I heard. He still checks in occasionally.
speak of the devil...
he's online right now.
germanjulian
Jun 16, 10:57 AM
8am for the iphone. normally 9.
No comments:
Post a Comment