DXoverDY
Dec 20, 02:38 PM
So apple decided to give me a crappy hard drive that died outside of my warranty. i am now trying to replace it. i'm following the guide at pbfixit.com for replacing the battery. however there's a "clip" apparently that is holding the right hand side of the case together and i see absolutely no way to unclip it. any help would be appreciated. i've been working on it for about 2 hours and i've had about enough and i'm ready to sell the pile of crap and buy a PC. apple gets "crappy design award of the year" for not making their hardware servicable that's for sure. and no, i'm not paying apple @$$loads of money for them to fix what should be simple for anyone to do.
yg17
Apr 14, 12:42 PM
"Why get the police and insurance companies involved? That was just a minor tap, it'll buff right out!"
mad jew
Dec 16, 05:50 PM
Thanks! How do I check that the antenna is plugged in correctly?
Well, I think this (http://www.info.apple.com/usen/cip/pdf/pbg4/pbg4_15fw800_apx.pdf) applies. It's for earlier PowerBooks but hopefully it's still the same. I haven't played with a newer PowerBook to be able to check this ( :o ). They're instructions on how to install an AirPort card but ti's pretty easy to use them to work out if your is installed correctly, hopefully. :)
Well, I think this (http://www.info.apple.com/usen/cip/pdf/pbg4/pbg4_15fw800_apx.pdf) applies. It's for earlier PowerBooks but hopefully it's still the same. I haven't played with a newer PowerBook to be able to check this ( :o ). They're instructions on how to install an AirPort card but ti's pretty easy to use them to work out if your is installed correctly, hopefully. :)
ReanimationLP
Dec 16, 10:54 PM
Well, if you also part it out, how much for the case/PSU/mainboard and whatevers left?
more...
ZombieZakk
Apr 19, 09:17 AM
go to staples or best buy buy a screen cleaning spray and some microfibers spray abiout 3-4 sprays on a small area of the cloth and wipe down the comp then dry it. Also keep a can of compressed air on hand to spray out the keyboard and little nooks.
DougJrS
Jan 24, 07:17 PM
Why would it cost you any large amount of money to move your phone line? You could just go to the local electronics store and get some phone wire and move it yourself.
The Airport Extreme has a modem in it if you don't want to move the phone line and you are limited to dialup.
Doug
The Airport Extreme has a modem in it if you don't want to move the phone line and you are limited to dialup.
Doug
more...
arn
Feb 26, 01:18 PM
accounts closed for now...
arn
arn
f4780y
Apr 16, 07:59 PM
Just thought I would say, I have retinapad 1.1.2 (the updated version for 4.3.1) and it works perfectly on 4.3.1. Even fixes the bugs in 1.1.1.
So I would double check if I were you. It is neither dead nor broken as far as I can see.
So I would double check if I were you. It is neither dead nor broken as far as I can see.
more...
lilcosco08
May 2, 10:34 PM
Heh. 3 way tie
THIS ISN'T HELPING :p
THIS ISN'T HELPING :p
Dwalls90
May 5, 10:03 PM
Using Windows to get things done bug free? How ironic. ;)
Lol, but let's be mature here, W7 is pretty flawless as on OS, especially for Micro$oft. It's less buggy than 10.7 DP2, and I didn't feel like triple-booting with 10.6 too, so I'll stick to W7 anytime 10.7 DP2 isn't quite reliable enough yet.
Lol, but let's be mature here, W7 is pretty flawless as on OS, especially for Micro$oft. It's less buggy than 10.7 DP2, and I didn't feel like triple-booting with 10.6 too, so I'll stick to W7 anytime 10.7 DP2 isn't quite reliable enough yet.
more...
dringkor
Apr 25, 02:17 PM
I have one and it works great. Video files (H.264/MOV) can be used in iTunes and iMovie, and you can Airplay them to your Apple TV 2 with excellent results.
I don't know about the battery life. I don't seem to have to charge it very often.
This could almost replace a "normal" camcorder but for two reasons:
(1) No optical zoom
(2) Poor low-light performance
For me it's a good supplement to my normal camcorder.
I don't know about the battery life. I don't seem to have to charge it very often.
This could almost replace a "normal" camcorder but for two reasons:
(1) No optical zoom
(2) Poor low-light performance
For me it's a good supplement to my normal camcorder.
usclaneyj
Nov 29, 09:50 AM
Try saving them as .gif instead of .jpeg, and do like others have said regarding your color management options.
Also, if you are talking about the way that the page previews in Dreamweaver "Design View", I can attest that DW doesn't render color the same way that most browsers will. So it's the in-browser preview that matters most.
Also, if you are talking about the way that the page previews in Dreamweaver "Design View", I can attest that DW doesn't render color the same way that most browsers will. So it's the in-browser preview that matters most.
more...
ucfgrad93
Feb 28, 09:12 PM
Holy crap, that was an amazing video! Thanks for sharing!
My wallpaper for the month of February was in honor of Discovery's last flight.
My wallpaper for the month of February was in honor of Discovery's last flight.
Laslo Panaflex
Jul 21, 04:06 PM
Originally posted by Freg3000
more...
Kelsey Rose 11584 in mint
Mr. Chow with her sister,
more...
as she leaves Mr Chow
dress, £260, Kelsey Rose
MORGAN FREEMAN FAKES IT WITH A
more...
xxBURT0Nxx
May 5, 10:14 AM
I removed my Samsung 470 SSD from an HP laptop that had Win 7 running. Trim was enabled automatically with Win 7. When I put it into my new Macbook Pro trim was not enabled. You can check by going into the Apple, then About, then More Info and finally into Serial ATA. When you scroll down you will see that trim is not enabled.( Without it, the SSD will fill up and slow down. Google it and see what it does). Groths.org had a Trim Enabler patch that worked perfectly. I downloaded it and clicked on it and it installed. When I went back into the Apple, etc I found that trim had been enabled. Kudos to Oskar. I dropped a couple of bucks on him from Paypal because I appreciate this kind of work. Maybe Apple will have trim enabled in the next OS, like Win7.
trim is only supported on SSD's that you buy from apple, and only recently.
As the other poster said, there haven't been problems with people running 3rd party SSD's w/o trim enabled. In fact some users have reported problems with their drives after enabling trim support.
If you really feel you must have it, search the boards, there is a tutorial here on how to enable it through some simple command lines.
trim is only supported on SSD's that you buy from apple, and only recently.
As the other poster said, there haven't been problems with people running 3rd party SSD's w/o trim enabled. In fact some users have reported problems with their drives after enabling trim support.
If you really feel you must have it, search the boards, there is a tutorial here on how to enable it through some simple command lines.
pncc
Dec 20, 02:47 PM
I surfed on to this page (http://www.microsoft.com/hardware/mouseandkeyboard/productlist.aspx?fprint=yes) and notice MS introducing fingerprint technologies. And i think its a pretty good idea. I want to know if it was mac compat. or if apple was considering introducing something like this in the future. or just what pple thought in general about it.
I don't think that would be OS X compatible.
Sony sells the Puppy that does work with OS X
http://bssc.sel.sony.com/Professional/puppy/files/SONY47653_FIU600.pdf
I don't think that would be OS X compatible.
Sony sells the Puppy that does work with OS X
http://bssc.sel.sony.com/Professional/puppy/files/SONY47653_FIU600.pdf
more...
wrldwzrd89
Sep 28, 03:03 PM
My ignorance is showing. Thanks, that was it.
Whose? James Craner's suggestion or mine? You didn't quote the post you used...
Whose? James Craner's suggestion or mine? You didn't quote the post you used...
chrono1081
Apr 12, 09:30 AM
Corona SDK could do it pretty easily. You'll want to watch tutorials from them at this site: http://www.learningCorona.com to make sure they cover what you want.
psychofreak
Mar 30, 11:43 AM
I don't have a portable console right now but a friend loved and got a lot of play from Monster Hunter...
Koyder
Dec 21, 10:42 AM
I guess the Star Wars kid can now kiss the "2003's Lamest" award goodbye...
bmorris
Jan 17, 09:03 PM
the meeting is 7 to 10c?
so it just started?
so it just started?
munkle
Jan 10, 10:51 AM
Another good keyboard shortcut is command(apple)+tab to shuffle through open apps.
Plus check out system preferences/keyboard & mouse/keyboard shortcuts. :)
Plus check out system preferences/keyboard & mouse/keyboard shortcuts. :)
terzinator
Apr 13, 09:29 PM
We have a small graphic design firm... four designers working on Illustrator and InDesign files... files might be 200MB to 1GB, generally. Really varies. Might be a brochure, logo design, packaging, whatever.
We have a Mac Mini Server running Snow Leopard Server, attached to a Promise RAID. All our files are on this unit. (Backed up regularly, yada yada.) We have a gigabit network, so it's plenty fast to move files around, etc...
here's the issue/question...
Our designers generally work on the files "on the server" rather than copy them down to their drives to work. They think it's faster and more efficient, and reduces the chances of extra files being created, or deleting the wrong one, or issues with "which version" is the most current, etc. Copying up and down files takes time, they say.
I argue (I'm the tech guy, not a designer) that it's asking for trouble. That working "off the server" could create file corruption if there's a network issue, or if there's an issue with a computer that's working on the file, or whathaveyou. I also think it's slow, even though it's a fast network. Any time saved "copying the file up or down" is going to be lost waiting for files to open and save and render and whatnot. I think it's very INefficient. All around, I just think it's a bad idea.
Whether it's a good idea, or a bad idea, or a standard practice, well, what say you? And if you think it's asking for trouble, what's the best way to deal with stuff like this? A different server? Is there good software that allows for making sure you're working on the current file, etc...? What are other graphic design firms doing in this regard?
If this isn't the best place for the post, let me know and I'll see if I can have it moved.
Thanks in advance.
We have a Mac Mini Server running Snow Leopard Server, attached to a Promise RAID. All our files are on this unit. (Backed up regularly, yada yada.) We have a gigabit network, so it's plenty fast to move files around, etc...
here's the issue/question...
Our designers generally work on the files "on the server" rather than copy them down to their drives to work. They think it's faster and more efficient, and reduces the chances of extra files being created, or deleting the wrong one, or issues with "which version" is the most current, etc. Copying up and down files takes time, they say.
I argue (I'm the tech guy, not a designer) that it's asking for trouble. That working "off the server" could create file corruption if there's a network issue, or if there's an issue with a computer that's working on the file, or whathaveyou. I also think it's slow, even though it's a fast network. Any time saved "copying the file up or down" is going to be lost waiting for files to open and save and render and whatnot. I think it's very INefficient. All around, I just think it's a bad idea.
Whether it's a good idea, or a bad idea, or a standard practice, well, what say you? And if you think it's asking for trouble, what's the best way to deal with stuff like this? A different server? Is there good software that allows for making sure you're working on the current file, etc...? What are other graphic design firms doing in this regard?
If this isn't the best place for the post, let me know and I'll see if I can have it moved.
Thanks in advance.
T'hain Esh Kelch
Apr 26, 04:54 AM
Your link is not working.
No comments:
Post a Comment